Error Code E IU
Freezer Room Icemaker Kit Error — electrical system error (motor, gear, Hall IC, circuit) in the freezer icemaker; or upper/lower heater open circuit
Moderate
Address soon - your appliance may not work properly
Also displayed as: E IU
How to Fix
- 1
Press the Test Switch on the icemaker. If ice does not drop even when Test S/W is pressed, proceed with diagnostics.
- 2
Check for loose connections from Main PCB to freezer icemaker.
- 3
Measure upper heater (red) resistance: expected 141~163 ohm. If open, replace the icemaker unit.
- 4
Measure lower heater (white) resistance: expected 22.3~25.7 ohm. If open, replace the icemaker unit.
- 5
Check icemaker motor and gear operation. If motor or gear is mechanically failed, replace the icemaker assembly.
- 6
Check Hall IC signal feedback. If no Hall IC signal, replace the icemaker kit.
- 7
If no issue with icemaker mechanism, check Main PCB and harness from Main PCB to icemaker.
- 8
Replace icemaker kit if electrical or mechanical fault is confirmed.
This Error Applies To
LG LRMVS3006D Series Refrigerators (2020) (2020–present)
Related Error Codes
Freezer Sensor Error — short or open circuit in the freezer thermistor
Refrigerator Sensor Error — short or open circuit in the fresh food compartment thermistor
Freezer Defrost Sensor Error — short or open circuit in the freezer defrost sensor
Refrigerator Defrost Sensor Error — short or open circuit in the refrigerator defrost sensor
Humidity Sensor Error — short or open circuit in the humidity sensor
Convertible (Pantry/Full Convert) Sensor Error — short or open circuit in the pantry drawer sensor
Room Temperature Sensor Error — short or open circuit in the ambient room temperature sensor
Icing Sensor Error — short or open circuit in the icing compartment (in-door icemaker) sensor